Upvc Door Lock Replacements
You might need to replace your upvc lock for several reasons. Whether it's because you've lost your key or the barrel has been damaged.
It is crucial to get your upvc locks replaced by a professional. This will ensure that the work is completed to the highest standards and provide you with the level of security you require.
Lock Cylinder
The lock cylinder is the area of the lock that is opened using the help of a key. The retaining screw is what separates it from the body of the lock that houses the locking mechanisms. A standard cylinder comes with a pin tumbler mechanism that is driven on one side by the key, and on the other by the locking cam, which activates the bolt mechanism of the lock. The cylinder can be replaced with another one to alter the lock's key-operation, design or security level.
The Euro profile Cylinder is the most popular type of cylinder used on uPVC doorways, but there are other versions like British standard or anti-snap. The higher security cylinders have an advanced pin tumbler and additional components to stop burglary techniques such as lock bumping or snap guns.
To replace the cylinder, you must remove the door handle first, and then loosen the retaining screw that keeps the cylinder in place from the inside of the door. Once you have done this you can take out the old cylinder and insert the new one. This process can be more difficult with older uPVC locks that are older than 20 years however, the modern locks are constructed with more durable materials and can be easily fitted using the appropriate tools.
It is important to purchase the correct sized of cylinder that will fit in your door. Otherwise, it may be difficult to install. The dimensions are usually measured from the center of the circular part in the keyhole to the center of the square spindle. This measurement is known as the PZ dimension.
You can verify that the cylinder you're using is of the correct size by inserting it in the door lock and turning the key. If you're unable to turn the key easily then it's time to purchase a replacement.
A few people choose to have their uPVC doors with cylinder locks replaced following a break-in or other event where the locks were damaged. Certain people might wish to improve the security of their home or business home. In some cases, updating your locks may be a legal requirement.
Lock Handle
Locksmiths can complete the simple task of changing the lock barrels on a upvc front door. It can be accomplished in just minutes. There are many reasons to want to change the locks. Your tenants might have moved out without returning keys. You may have lost the key.
To gain access to the screwhole in the backplate, you will need to take off both the handle and the cylinder from your front door. This is usually done with a screwdriver and can be fairly easy, although you must be careful not to scratch the handle or the cylinder cover. After removing the cylinder you will need to measure the locking mechanism of the upvc in order to order a new cylinder. The PZ and Backset are the two most crucial measurements.
If you know the manufacturer of your upvc lock mechanism then it is best to make a new cylinder with that. The most efficient method to do this is by looking at the long metal faceplate of the lock and if there is a name printed on it, that will be your brand. The shape of the gearbox is also a method to identify the brand.
There are different types of Upvc locks, such as euro cylinder locks as well as anti-snap euro cylinder lock. They look alike, but they differ in a few ways that affect their security. The euro cylinder lock with anti-snap is more difficult to open than standard euro cylinder locks.
You can purchase the lock parts made of pvc and install them yourself in the event that you are able to use a screwdriver, however, it is generally recommended to leave this task to the professionals. They will be able to provide you with the correct parts and finish the job quickly and to a high standard. A professional can repair any damage that may have occurred during the process.
Fixing Plates
The latch can cause problems on doors made of Upvc if it's not aligned with the strike plate. This can cause the door not to close properly or become stuck. Often the reason for this is that the strike plate is not correctly positioned to the frame. To fix this, just move the strike plate up or down until it is aligned with the frame. Additionally, tightening hinges could aid. It is important to not over tighten the screws as this could strip them.
It is not as hard as you may think to locate replacement handles for upvc doors. You can find many different types of handles online. The handle you select should match the cylinder and keyhole on your upvc door. To make sure check here is the case you need to measure the distance between the cylinder center and the keyhole and the spindle of your handle. It is also important to ensure that the spring cassette is compatible.
Installing a new lock system is a different option to replace your upvc door. There are a variety of options available with locks that are made for use in the home to those designed for commercial use. A lot of locks are made to resist corrosive conditions, and come with a variety of features.
Whether you are looking for an Upvc door replacement handle or a new lock, Fab and Fix has the items you require. They offer a broad selection of handles available in a variety of styles and colors and are constructed from high-quality materials. They are also tested to meet various security standards. They are also simple to install. Additionally, they are cheap and offer excellent value for money.
Gearbox
When a uPVC door lock fails, the problem is usually limited to the gearbox rather than the entire multipoint mechanism. This means that replacing the gearbox can be a much easier job than changing the handle or barrel, and is something that anyone with a decent DIY skills can complete without too much difficulty.
The most important thing to do when changing the uPVC gearbox is to use the right tools and follow the correct procedure. If you have a suitable screwdriver and tape measure, the process is easy and can be completed in less than an hour. It is important to check the description of the product before you begin. This will inform you of the kind of gearbox that is suitable for your door.
Always use a British Kite-marked locking on your uPVC doors. These locks are equipped with the most modern security features to guard against a range of threats that include the latest phenomenon called "lock snapping". This means that the UK government will test and confirm your new lock as high-security.
Before you start the process of replacing your uPVC lock it is vital that the door is propped open or secured securely to ensure that it will not close during the procedure. First, you will need to loosen the long screw that holds the handle in place. Make sure you secure this screw since it will need to be reattached later.
After you have removed the screw, you can take off the handle and see the inside of the cylinder for the first time. Once the old cylinder is been removed, you will be required to carefully insert the new cylinder, ensuring that it is in line with the barrel of your lock. When you are sure that everything is in the correct position, you can screw into the long screw, and then secure the handle to the original location.
The most common reason for the uPVC door handle not lifting up to lock is an absence of lubrication however, in some instances, the issue could be due to a complete mechanism failure. If you suspect this, it's best to call in a locksmith.